A ver si esto tiene algo que ver (por favor, que alguien confirme antes de probar)
KEY FOB PROGRAMMING
Procedure
1. Ensure all doors are unlocked using the key.
2. Press and HOLD the large plip key button while continuously
for 20 seconds. After 20 seconds press the
once while still holding the large button.
3. The LED will stop flashing.
4. Release the large button and the LED will light
5. Press the large button one time, and the LED
6. Open the door and hold the Plip key near the
press the large plip button one time.
7. Now turn the ignition ON, and wait 10 seconds
8. After 5 seconds, Plip should now operate.